SoundSkins Pro is made up of 3 layers: rubber acoustic foam, foil & rubber butyl. This custom blend of materials allows you to layer any panels in your vehicle to reduce vibrations and road noise, reduce loss of sound and improve heat rejection.

SoundSkins Classic is made up of foil and rubber butyl to provide the best sound damping possible from a thin layer of material.

SoundSkins Rings v3 are made of high-quality rubber closed cell foam, a unique blend of butyl rubber, making it waterproof and long lasting. The rings have a 3M high level adhesive for fast, easy application that sticks to ANY surface.

We are the original 3-in-1 product with acoustic, closed cell foam on top of foil and rubber butyl on our premium product, SoundSkins Pro. Other brands sell these two materials separately. With SoundSkins Pro, you will only need one product to get superior results compared to buying and installing 2 separate products.

Our foam speaker rings stand out from the competition because they are the ONLY foam speaker ring kit that comes in strips instead of rings to suit all the components of your speakers in one application without wasting material. Our rings also come provided with 4 wave foam backing sheets that will improve your speaker’s bass response.

Yes, just peel and stick onto a properly cleaned and dried surface, and you’re good to go!

The recommended application temperature range is between 50 to 70 F.

For best results when reducing road noise, we recommend installing SoundSkins Pro on your vehicle floors, door inner skins, and trunk.

We also recommend SoundSkins Classic on the door outer skins and roof. This will reduce vibrations and dampen sound significantly for the quietest ride possible.

Last, we recommend placing SoundSkins Wavy Foam inside of the plastic door cards, which will further help with thermal acoustic insulation and reduce rattles.

If you are not able to get full coverage in your vehicle, we recommend taking note of the areas of your car where sound and vibration occur the most, and covering those main areas with SoundSkins.

SoundSkins Pro is made up of 3 layers: acoustic foam, foil & rubber butyl while SoundSkins Classic is made up of only 2 layers: foil and rubber butyl. SoundSkins Pro is a thicker and heavier material than SoundSkins Classic, and provides more advantages in soundproofing because the layer of acoustic foam aids in absorbing noise and acts as a decoupler to isolate sound and vibrations.

SoundSkins Pro is our door kit, which covers 11 sq ft. One roll covers 2 doors in most standard sized vehicles.

SoundSkins Pro Mega Kit is a kit consisting of 4 rolls of SoundSkins Pro, covering 44 sq ft. It is enough to cover 4 doors, and the trunk of most standard sized vehicles.

SoundSkins Pro Plus is the largest roll of SoundSkins Pro, both in width, length, and weight. It covers 64.5 sq ft and is enough to cover 4 door panels, trunk, floor, and roof of most standard sized vehicles.

Yes, you can put SoundSkins Heat Shield under your hood and engine compartment.

Our material is very pliable and easy to work with. You do not need to have experience or fancy equipment to cut and work with our material, just your hands and a blade or scissors.

Our products are manufactured in China, and our pre-cut template kits are cut here in the USA. Due to the unique blend of materials and the large scale of our production, we outsource production to keep the quality high and the prices down for our customers.

Pro Series

• Description: A premium 3-layer material combining butyl adhesive, aluminum, and foam.
• Best For: Comprehensive soundproofing and vibration dampening. Ideal for doors, trunks, and large flat surfaces where noise reduction is critical.

Classic Series

• Description: A 2-layer material with butyl adhesive and aluminum foil.
• Best For: Reducing vibrations and blocking road noise. Perfect for outer doors, floors, firewalls, ceilings, and areas requiring sound deadening.

Foam Series

• Description: Closed-cell rubber foam with adhesive backing.
• Best For: Absorbing high-frequency sound and insulating against heat. Great for speaker baffles, interior panels, and roof linings.

Heat Shield

• Description: A fiberglass aluminum foil layer with thick closed-cell foam and adhesive backing.
• Best For: Protecting against heat while reducing road and engine noise. Perfect for firewalls, hoods, ceilings and areas exposed to high temperatures.

Vehicle-Specific Pre-Cut Kits

• Description: Custom-fit soundproofing kits tailored to specific vehicle models.
• Best For: Quick and precise installation for doors, cabins, and trunks, ensuring maximum efficiency and coverage.

1. Good - Rings V3 + Pro Speaker Kit

• Benefits: Prevents sound leakage between speakers and cabin while improving audio quality by sound-deadening the area around and behind the speakers.
• Ideal For: Budget-friendly soundproofing and enhanced audio clarity.

2. Better - Rings V3 + Vehicle-Specific Kit

• Benefits: Fully insulates the inner door, reducing road noise and improving insulation.
• Ideal For: Serious soundproofing and superior cabin insulation.

3. Best - Rings V3 + Vehicle Specific Kit + Classic + Wavy Foam

• Benefits: Fully insulates the inner door, reducing road noise and improving insulation. Blocks road noise and insulates the cabin with Classic on the outer door. Wavy Foam applied to the panel provides ultimate sound-deadening for a fully sealed door. Reduces road noise by 30%+ and offers heat insulation to keep the cabin cool.
• Ideal For: Those seeking the ultimate soundproofing and insulation experience with maximum noise reduction and thermal insulation.

For a detailed visual guide, check out our image here.

Assess Your Vehicle: Measure the areas you want to soundproof.

Choose Materials: Select the best fit for your needs from Pro, Classic, Foam, or Heat Shield.

Calculate Coverage: Determine the square footage required for each area.

Use the Vapor Barrier as a Guide:

• Typically, the vapor barrier serves as a helpful guide.
• If the vapor barrier is too small, tape transparent plastic to the door and trace the features, including harness and door clip holes.

Transfer to Cardboard:

• If the vapor barrier covers most of the door, gently remove it and place it on a piece of cardboard.
• Trace the vapor barrier onto the cardboard, including the harness and door clip holes, and cut out the shape.

Cut the SoundSkins Material:

• Lay the cardboard template onto the SoundSkins material.
• Trace and cut the pattern for a precise fit tailored to your vehicle.

Consult Our Experts: For additional support, reach out to our team for personalized guidance and recommendations.

This approach ensures a custom fit and maximizes soundproofing efficiency, giving your vehicle the ultimate noise reduction and insulation.

Phone: +1 (877) 211-5597

Email: usa@soundskinsglobal.com

All of our pre-cut kits that we currently sell are listed on this page.

We will be releasing more Pre-Cut Door Damping Kits in the following months. We'd love to know your input on which kit we should release next!

See our full list of pre-cut kits

No we do not. All of our kits are hand-designed and built from the ground up in the US. Creating templates for each kit that we offer takes months of research and development, and is simply not possible to offer for any car in the market.

If we see enough demand for a certain car model, we will plan to release one in the future.

We do not cut the speaker hole for you in our pre-cut sound deadening kits because this hole must be a very precise fit, and speaker hole size and placement may vary by car.

The kit we offer for the US market is the Subaru WRX 4 door inner skin kit.

We have no affiliation with the videos that are produced by third party users. To receive the most updated and accurate list of products we offer, please only refer to SoundSkins' website and social media channels instead of outside sources.

SoundSkins will reduce up to 50% of vibration and sound when applied to a vehicle.

SoundSkins Pro is rated to withstand temperatures between -40F to 356 F (-40C to 180C)

SoundSkins Classic is rated to withstand temperatures between -40F to 464F (-40C to 240C)

The R-value per inch of SoundSkins Pro is 3.12

The R-value per inch of SoundSkins Heat Shield is 4.10

The R-value per inch of SoundSkins Classic is 4.33

Currently we only ship to North America and Canada.

Use our Store Finder to find your nearest dealer.

Click Here for Store Finder

USA

SoundSkins in North America is shipped from our warehouse in Cerritos, California.

Sound Deadening Order Processing Times During The Holidays

1-10 Business Days Prior to 12pm (excluding public holidays, Saturdays and Sundays)

Enclosure Order Processing Times

7-14 Business Days Prior to 12pm (excluding public holidays, Saturdays and Sundays)

UPS Ground Only*

SoundSkins Custom Enclosures are made to order.

Delivery Times - North America

Orders in the Continental US: Expedited Shipping | 1-3 Business Days - AFTER PROCESSING TIMES

Free Standard Shipping | 4-10 Business Days - AFTER PROCESSING TIMES

Orders in Hawaii or Alaska: (Charged based on weight) Standard Shipping | 5-10 Working Days - AFTER PROCESSING TIMES

Every order comes with tracking number and it will be emailed to you once the shipment has left our warehouse in California.

No, we only offer free shipping to the continental US. If you are located in Canada, Alaska, or Hawaii, you will need to pay a customs fee in addition to a shipping fee.

Our sound-deadening products are backed by a lifetime warranty against manufacturer defects, while our subwoofer enclosures come with a 5-year warranty for manufacturing defects. Integral changes to enclosure voids warranty.

EXCLUDES OPEN BOX PRODUCTS

SoundSkins warrants that the purchased product is free from manufacturing defects and will function as intended for the life of the product. For subwoofer enclosures, the warranty covers manufacturing defects for a period of 5 years from the date of purchase.

The liability of SoundSkins is limited solely to replacing defective materials.

EXCLUDES OPEN BOX PRODUCTS

Normal wear and tear of the material or form, including rips, extreme stretching, improper use or storage, or unauthorized modifications, are not covered under the warranty.

Additionally, open-box products and subwoofer enclosures are excluded from warranty coverage beyond the specified 5-year term for manufacturing defects.

Open box products not covered by warranty.

A picture of the damaged parts and/or wallet will be requested as part of the warranty assessment. You can make a claim through our Contact Form

We want you to have the most risk-free experience possible, so we will ensure that you have no return costs should an item need to be returned in relation to warranty if the order was purchased from our online store.

We process returns up to 30 days of order purchase as long as the items were purchased through SoundSkinsGlobal.com and are in their new, unopened and unused condition.

Open box products are not eligible for returns or exchanges.

All SoundSkins Enclosures are custom-made. Enclosure orders cannot be cancelled or modified once placed. Thank you for your understanding.

Please contact Team@SoundSkinsGlobal.com with your order number in the title to begin your return.

Should a return be required, postage charges and a restocking fee of up to 15% will apply.

We only accept returns from products purchased from SoundSkinsGlobal.com that has been purchased within the last 30 days.

Open box products are not eligible for returns or exchanges.

If you would like to cancel an order you have already placed, please contact us as soon as possible.

Orders that have already shipped out cannot be canceled, and they must go through the returns process instead.

Open box products are not eligible for returns or exchanges.

Our products are available online on Crutchfield and Amazon

Please use our store finder to find a local dealer near you for in store purchase:

Store Finder

If you are interested in becoming a dealer, please fill out a contact form or email us at Team@soundskinsglobal.com