In the process of upgrading the soundproofing of your vehicle, you will keep on hearing names such as STC and NRC ratings. These measurements find widespread application in the acoustic industry to define how materials treat sound - but when applied to cars it can be confusing. Knowing these ratings will make you make better choices when deciding on insulation to be used on your vehicle.

Many automotive builders, restorers, and audio enthusiasts want to know about how to interpret soundproof ratings is key to achieving quieter, more controlled interiors without adding extra weight or cost.

What Are STC and NRC Ratings?

STC (Sound Transmission Class) & NRC (Noise Reduction Coefficient)

These ratings have different characteristics but both are used to measure how materials react to sound.

• STC measures how well a material blocks sound from passing through.

• NRC measures how well a material absorbs sound within a space.

In simple terms:

• STC is about stopping noise.

• NRC is about reducing echoes and reflections.

Sound Transmission Class

STC rating is a numerical value that shows how effectively a barrier, like a car door or floor, prevents sound from traveling through it. The higher the STC number, the better it blocks sound.

For example, a standard metal car door may have an STC rating around 25–30, while a properly insulated panel with a butyl damping layer and foam composite can reach 40+.

In vehicles, high STC materials are typically dense and layered—like butyl rubber sheets with aluminum backing, used in SoundSkins Global products. They minimize sound transfer from tires, engines, and wind into the cabin.

Noise Reduction Coefficient

While STC deals with sound blocking, NRC focuses on sound absorption. The NRC rating measures how much sound energy a material absorbs instead of reflecting back.

An NRC value ranges from 0.0 (no absorption) to 1.0 (total absorption). For example, a bare metal panel reflects nearly all sound (NRC 0.05), while a thick acoustic foam may absorb most frequencies (NRC 0.80 or higher).

In a car environment, materials with a moderate to high NRC help reduce echo and resonance within the cabin, especially important for improving audio clarity and reducing reverberation in enclosed spaces like doors or trunks.

NRC vs. STC: Understanding the Difference

Don’t mix up ‘NRC' and 'STC' in confusion because both deal with sound, but their functions are different. You can note it like that, STC keeps the noise out, and NRC keeps the noise from bouncing around inside.

High STC rating ensures that outside traffic and engine noise sounds will stay out, while a good NRC rating ensures the inside sound environment feels soft, not echoey.

How STC and NRC Work Together in Cars

In professional automotive soundproofing, the goal isn’t to chase the highest possible STC or NRC rating, but to find the optimal balance.
For instance, if you install only dense materials for blocking noise, your cabin might still sound hollow because sound waves reflect inside. Likewise, using only foam for absorption won’t block exterior noise effectively.

• Butyl rubber base enhances STC by blocking vibration and low-frequency noise.

• A foam core layer increases NRC by absorbing mid- and high-frequency reflections.

• A foil surface layer adds thermal protection and additional reflective damping.

Together, these layers deliver balanced soundproofing and acoustic tuning which is best for automotive environments.

Measuring Acoustic Performance

Home and studio soundproofing products mostly list official STC and NRC ratings, but vehicle soundproofing materials are rarely tested in the exact same way because of differences in structure, shape, and application. However, acoustic principles still apply.

In general:

• Higher-density materials = higher STC

• Porous or open-cell structures = higher NRC

SoundSkins Global products are designed using this balance. Their SoundSkins Pro Sheets and Door Kits use multi-layer combinations that simulate high-STC barriers while maintaining efficient NRC absorption inside the cabin.

This engineering approach ensures noticeable results: less road noise, better temperature control, and richer audio fidelity—all with fewer materials and easier installation.

Practical Example: Choosing Materials by Purpose

Here’s how to apply these ratings to real-world vehicle insulation planning:

Choosing materials this way ensures that every part of the car contributes to a quieter, more comfortable interior.

How SoundSkins Global Simplifies Acoustic Optimization

SoundSkins Global brings the science of STC and NRC into practical automotive use. Instead of requiring multiple layers or complex installations, each product is engineered for both sound blocking and absorption in one step.

Their insulation sheets combine dense butyl rubber for vibration control and closed-cell foam for sound absorption. This dual-action structure means you get excellent noise isolation, heat control, and enhanced sound quality—all with less effort.

For builders, installers, and enthusiasts, it’s the simplest path to achieving studio-level acoustics in a daily vehicle.

Redefining Automotive Acoustics with Smart Balance

Understanding STC and NRC ratings helps demystify what truly makes a quiet, well-insulated car. While STC gives you the power to block external noise, NRC creates a refined sound environment inside. Both are essential parts of high-quality vehicle soundproofing.

With innovative solutions from SoundSkins Global, you don’t have to choose between them—you can have both. Through smart material design and acoustic science, these products deliver the right blend of sound isolation, absorption, and thermal efficiency for every drive.