SoundSkins | Kit de Insonorización Pro Plus | SSK-PROPLUS | 3 Capas (Espuma Acústica, Aluminio, Butilo de Goma), 6 m²

S/. 1,727.00
SKU: SSK-PROPLUS

Want to cover more & spend less?
Purchase 2 Rolls & get 10% off use code PRO2
Purchase 3 Rolls & get 15% off use code PRO3
Purchase 4 Rolls & get 20% off use code PRO4
Purchase 5 Rolls & get 25% off use code PRO5

How Much SoundSkins Do I Need?

Vehicle Coverage

Total Estimated Square Footage

-- Sq Ft

The SoundSkins Pro Plus Workshop Kit is a single continuous roll of 3-layer sound deadening, 29.5" wide and 315" (over 26 ft) long, for a total of 64.5 sq ft. That is enough to treat a typical car from top to bottom: doors, floor, trunk and roof. Every inch combines rubber butyl, foil and closed-cell acoustic foam, so you stop panel vibration and block road noise in one pass. It is also the lowest cost per square foot in the SoundSkins Pro range, which makes it the go-to choice for full builds and install shops.

Specifications

Product SoundSkins Pro Plus Workshop Kit
SKU SSK-PROPLUS
Total Coverage 64.5 sq ft
Roll Size 29.5" x 315" (one continuous sheet)
Contents 1 roll on a cardboard tube
Total Thickness 0.18"
Layer Build 0.12" closed-cell foam, 0.0039" foil liner, 0.059" rubber butyl
Temperature Rating -40°F to 356°F (-40°C to 180°C)
Application Temperature 50°F to 70°F
Water Resistance Waterproof foam and butyl layers
Fitment Universal, cut to fit
Warranty Lifetime, against manufacturer defects

Save More When You Buy More Rolls

Running an install shop or treating more than one vehicle? Apply a multi-roll code at checkout:

Rolls Code Discount You Save Price per sq ft
1 None None None $7.66
2 PRO2 10% off $98.80 $6.89
3 PRO3 15% off $222.30 $6.51
4 PRO4 20% off $395.20 $6.13
5 PRO5 25% off $617.50 $5.74

A Full Car From One Roll

Here is where 64.5 sq ft typically goes in a sedan. Every vehicle is different, so use this as a planning guide:

  • All four doors: Outer skins, access holes and speaker areas, for better mid-bass and quieter doors.
  • Floor: Front and rear footwells under the carpet, where tire noise and exhaust drone come through.
  • Trunk: Trunk floor, wheel wells and lid, the main source of rattles when you run a subwoofer.
  • Roof: Behind the headliner, to cut rain noise and wind roar at highway speeds.

Only treating the doors and trunk? The Pro Mega Kit (44 sq ft) may be enough. Just doing the doors? See the Pro Two Door Kit.

Why a Continuous Roll Beats Pre-Cut Sheets

Floors and roofs are the biggest, most awkward panels in a car. With pre-cut sheets, you end up joining several small pieces, which leaves seams and wasted offcuts. The Pro Plus is one 29.5" wide sheet over 26 feet long, so you can cut a full floor section or roof panel in one piece. That means fewer seams, less waste and a faster install, which is exactly why shops choose it.

One Layer Does the Work of Two

The usual approach to sound deadening is a butyl mat to stop vibration, followed by a separate foam layer to block airborne noise. SoundSkins Pro bonds both into a single 0.18" sheet. The butyl kills panel resonance, the foil keeps it tight to the metal and the closed-cell foam absorbs noise and cushions trim. You buy one product and do one install instead of two. See how SoundSkins Pro works.

Installing a Full Car

  • Work in stages: Doors first, then the trunk, then the floor and roof, so the car is never fully stripped at once.
  • Template the big panels: Trace floor and roof sections on paper before cutting to get the most out of the roll.
  • Prep every surface: Clean with isopropyl alcohol and apply between 50°F and 70°F for the best bond.
  • Roll it down: Press firmly with a roller, especially on the roof, so the butyl grips fully overhead.
  • Keep it clear: Leave drain holes, seat bolt holes, wiring and airbag areas (such as roof curtain airbags) uncovered.

Frequently Asked Questions

Is one Pro Plus roll enough for a whole car?

For most sedans, yes. 64.5 sq ft usually covers all four doors, the floor, the trunk and the roof. Larger trucks and SUVs may need a second roll, and the PRO2 code gives you 10% off two rolls.

What is the difference between Pro Plus and the Pro Mega Kit?

Both use the same 3-layer material. Pro Plus gives you 64.5 sq ft on one continuous roll at a lower cost per square foot. The Mega Kit gives you 44 sq ft in four sheets, which suits doors plus trunk or floor.

Can I use it on the roof?

Yes. It bonds well overhead when rolled firmly, and it helps cut rain noise and wind roar. Keep it away from curtain airbag areas along the roof edges.

Do installers get a bulk discount?

Yes. Multi-roll codes give 10% off 2 rolls (PRO2), 15% off 3 rolls (PRO3), 20% off 4 rolls (PRO4) and 25% off 5 rolls (PRO5).

Is there a warranty?

Yes. SoundSkins sound deadening is covered by a lifetime warranty against manufacturer defects.

SoundSkins Pro Plus
64.5 sq ft
PN: SSK-PROPLUS

PN: 9352961046155

The SoundSkins Pro Plus is an extra large workshop roll of our wildly popular SoundSkins Pro sound damping material, offering you much more material for your vehicle sound deadening project.

Designed to improve your car's stereo performance and reduce excess road noise and vibration in a single material.

THE ULTIMATE SOUND DEADENING ROLL

A SoundSkins Pro Plus Workshop Kit covers 64.5 sq ft which is enough to cover almost every section of any vehicle.

The sheet is a massive 29.5" x 315" in size and comes mounted on a cardboard tube for easy mounting and dispensing of the new larger size sheets.

Made by machine, the new large cut SoundSkins Pro Plus is perfect for workshops that do multiple vehicles and helps reduce costs and wastage.

WHAT IS SOUNDSKINS PRO PLUS?

SoundSkins Pro Plus is a combination of 3 layers, acoustic foam, foil & rubber butyl (the black sticky stuff). This custom blend of materials allows you to layer any panels in your vehicle to reducing vibrations, loss of sound and improve heat rejection.

Large single sheets make it easy to apply and cut to size for any application.

The rubber butyl has a high adhesive level meaning it will never never fall off once applied correctly. The foam and butyl are both waterproof and heat proof designed to stand the test of time.

1x SoundSkins Pro Plus Roll

Consists of:
1x Sheet 29.5" x 315" (rolled up)
0.18" Thickness

Coverage
64.5 sq ft

Weight
40lbs

Material
0.12" Foam
0.059" Butyl
0.0039 Foil Liner In Between

Contents

WHAT'S IN THE Box?

1x SoundSkins Pro Plus Roll

How to Install SoundSkins Pro Plus

DOWNLOAD DETAILED INSTRUCTIONS SHEET

Product Specs/Testing Data

DOWNLOAD SOUNDSKINS PRO SPECS AND TESTING DATA

Watch it in action

Customer Reviews

Overall rating: 4.9 / 5 from 34 reviews.

Customer photo review of SoundSkins Pro Plus | Workshop Kit

The kit was perfect for my F150. I did a full install on the floor, rear wall and all four doors. The installation was simple enough once I got the cleaning done after the carpet removal. The difference was amazing. I wish I had known about the effects of sound deadening years ago. My music sounds clearer and crisper than it ever has. The road noise is drastically reduced. Thanks for a great product!

SoundSkins Pro Plus | Workshop Kit

Customer photo review of SoundSkins Pro Plus | Workshop Kits

I used soundskins pro and heat shield on a ford van with a 7.3 diesel. I had amazing results. Going to do the full van now and all my other vehicles. This stuff is incredible.

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

Really cut down on dual exhaust low end sound and mild road noise that had come from the doors. Hoped for more but got more than expected. Worth the money.

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

Absolutely incredible product and quality are very nice. I love having all 3 products in one makes instalation a breeze! Highly recommend!

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

I installed on a Kia Sportage SXl Gt line 2016 cover all the floor, trunk door, both rear doors, , Trunk (where the tire is). only nor left for the two front doors, so i need to buy more. absolutely happy with the purchase.

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

I've done alot of research and found that the soundskins products was overwhelming the best product you can find. It's easy to work with and once your done you will definitely appreciate the quality of the product.

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

The SoundSkin Pro roll was top notch, one roll will do the floor and back cab of a Jeep Gladiator. The rubber butyl adheres extremely well, so you better have the SoundSkin placed where you want it. The foam material was really durable, crawled all over the place when installing and it held up good, didn’t tear. Made a dramatic improvement in road noise coming from the floor and back of the cab. Happy with the results. Will order the door kit too.

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

Used a number of Youtube videos to get educated on installing the Soundskin material. Had to get a PhD in disconnecting wiring harnesses and connectors. All went well! Took lots of photos and used lots labels. Made templates as required and kept referring to the videos.

SoundSkins Pro Plus | Workshop Kits

Customer photo review of SoundSkins Pro Plus | Workshop Kits

Soundskins install went perfectly and the outcome was better than I could have ever imagined. My Jeep sounds amazing now!

SoundSkins Pro Plus | Workshop Kits

Project was the cab of a 2005 Dodge Sprinter. I stripped the floor and ceiling and placed the product on both. It went on easily and rolled it with the company's roller. I put the floor and ceiling back together and drove it around noticing a notable difference in sound quality and less rattling. The job took less than four hours. I'm very happy with it and intend to do the same to my 1969 Mini.

SoundSkins | Pro Plus Sound Deadening Kit | SSK-PROPLUS | 3 Layers (Acoustic Foam, Foil, Rubber Butyl), 64.5 sq ft

So I bought the Pro Plus shop roll. I'm the type that is very meticulous and take my time. So far it has taken me one month just to do my rear doors. My biggest problem is I have one full time job and two part time jobs. My time is very limited. 2008 Subaru Forester. On my rear doors I covered the entire inside of the door panel. Plus the entire backside of the outer door skin and the surface that faces the door panel. So three layers per door. Talk about one solid thud when closing my doors now. No hollow sounds, rattling, buzzing or vibration any more. Next up will be my front doors and rear hatch door. Great product and even better company to do business with.

SoundSkins Pro Plus | Workshop Kits

I put this still all over my van and it made it so much more quiet and makes my van feel more structured and insulated. It was a super easy product to put on and cut to whatever size I needed. I couldn't recommend this enough.

SoundSkins Pro Plus | Workshop Kits

Used this for sound deadening and insulation for my sprinter van renovation and the difference was night and day! It really cut down on road noise and keeps my van cool on hot days. I'm very happy with my purchase.

SoundSkins Pro Plus | Workshop Kits

This material was easy to cut and super easy to apply! It made such a huge difference in reducing road noise in my car. I'm very happy with my purchase.

SoundSkins Pro Plus | Workshop Kits

I am using this in my Sprinter Van and IT WORKED GREAT for Road Noise and to KEEP the sound IN! Great product!

SoundSkins Pro Plus | Workshop Kits

Easy material to work with, seems to do a good job at noise reduction although this is just my perception and not backed by measurement or evaluation of other materials. Can not evaluate how well the material will stay in place over an extended period of time & fluctuations in temperature, so far so good.

SoundSkins Pro Plus | Workshop Kits